Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Configuring Altera FPGAs using Spansion S25FL2 serial flash

For the record, I'd like to state that the newer S25FL2 series works with Altera FPGAs. I was able to configure a Cyclone IV E with the S25FL216 (2M x 8) device, and it would likely work with other ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Thanks for the feedback.

Unfortunately it looks like 2.7V is the minimum supply voltage, I'm still looking for an EPCS16 equivalent that works with Vcc of 2.5V.

(Although I haven't looked recently).

Nial.