Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Case temp vs. junction temp

Hello, I have a board with an Arria GX on it with no heat sink. The case temperature of the FPGA stabilizes around 55 degree C. I am trying to figure out how that translates to the junction t...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Thanks Daixiwen! I did use PowerPlay early on as an estimate but I do not have an accurate test vector file to get a more accurate result. So far the measurements seem to be below the worst case scenarios I plugged in during the design phase.

Thank you!