Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

can't read/write DDR2 with HPC II

Hi, I try to read/write data to ddr2 using altmemphy HPC II in full data rate. I use Cyclone IV GX FPGA Development Kit Board, DDR2 modules are Micron MT47H16M16 with 16bits interface (32bits...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Hi SebastienG,

I would like to ask you if you could solve this problem.

Also I wanted to ask if you had problems with the local_rdata bus. In my case I can't see any data in local_rdata bus during the functional simulation. However, using signaltap I can see the data in the local_rdata bus.

I really need to see the simulation. I don't know if you have experienced this problem.

Thanks,

Juan