Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Byte Blaster II problem

Hi, I have a Byte Blaster II old one(of 2002),if i connect to LPT port it shows Byte Blaster II in quartus programmer,but when i connect it to target device(i.e Cyclone IV GX PCIE board), its u...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

In quartus programmer it is getting detected.(showing byte blaster II), the problem is unable to scan the JTAG, I tried to debugg it, It has LT part and few transistors(around 20nos).

My target logic is 2.5V its a cyclone iv GX device.