Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

blinking of two LED's.

Hello, Hi guys. i wrote a program in verilog of updown counter. As the board I am using is of 50 Mhz, so to actually see the LED blinking I divided the clock. My output was routed to single...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Since the board layout is totally unknown with what you have explained, it could be that the leds are connected to each other and therefore are both blinking.

If that isn' t the problem, than maybe you should post a board layout, or the name of the board. Maybe even the code can help