Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

BGA Socket Adapters? or 2 FPGAs connected?

Hi guys, I'm doing a university project. I trying to design a board and i'm running into the problem of limiting pins and logic element counts. The university can only mount flat pack st...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

--- Quote Start ---

What i'm making is a video over ethernet boards and need the following devices:

(gpio) 40 pins : Terasic D5M Camera (For TX board) or Terasic LTM Screen for the (RX Board).

~57 Pins: SDRAM 32bits wide. To copy the DE2-115 i would be using 2x64mb chips.

~47 Pins: Ethernet (use the SMSC LAN91C111)

--- Quote End ---

What is wrong with using a Terasic board for the FPGA too?

--- Quote Start ---

I'm in Australia in the case of talking about location

--- Quote End ---

Have you checked board assembly prices? You might be surprised how reasonable they are.

Cheers,

Dave