Avalon-MM master? in SOPC for a FLASH mem

Dear Avatar

I have manged to get the SOPC working. Using the compnent wizrd i have made he Avlone master, i then edited the pins, so there are appropiate. I am now getting the following eerros

Info: cfi_flash: Flash memory capacity: 16.0 MBytes (16777216 bytes).

Error: hpdj_inst.m0: "cfi_flash.s1" cannot be at 0xffff (0x0 or 0x1000000 would be OK)

Error: hpdj_inst.m0: "cfi_flash.s1" (0xffff..0x100fffe) outside range (0x0..0xffffff)

Error: tristate_bridge.avalon_slave: Must be at address 0x0

I have tried to correct it. BUt not changes to errors

Am i correct in beliving this will generate a VHDL files that will let me write and read to the Flash.

Regards Dharmesh Joshi