Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

AS paralell SFL

I have some questions about conventional AS config and SFL config. I have one connector for jtag access, and one connector for AS config. My config device is an epcs4. I think it's very l...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

I have ASMI block in my design.In this case,how do I connect other pins?

Isee following errors when I disable Share ASMI interface option.

Error: Pins ALTERA_DCLK both have the SPI-related DCLK Pin assignment, but only one pin can have this assignment

Error: Pins ALTERA_SCE both have the SPI-related SCE Pin assignment, but only one pin can have this assignment

Error: Pins ALTERA_SDO both have the SPI-related SDO Pin assignment, but only one pin can have this assignment

Error: Pins ALTERA_DATA0 and ALTERA_DATA0 both have the SPI-related Data[0] Pin assignment, but only one pin can have this assignment