Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
10 years ago

ArriaV GZ FPGA power up issue

Hi all, I am using ArriaV 5AGZME1EH29 in my design for which I'm following the same values of supply to the power pins as recommended in pin configuration guide.I have uploaded the schematics o...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
10 years ago

resfton is right. VCC = 0.85V for GZ device. sorry.

srujank - I also suggest review schematic and PCB. check the register value between all power and groud. and check the bad connection such as output pins connect each other. It is possible FPGA is already broken by bad connection.