Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorArriaV GZ FPGA power up issue
Hi all, I am using ArriaV 5AGZME1EH29 in my design for which I'm following the same values of supply to the power pins as recommended in pin configuration guide.I have uploaded the schematics o...
Altera_ForumHonored Contributor
Honored Contributorwhy vcc is 0.85v? it should be 1.1 or 1.15v.
https://www.altera.com/content/dam/altera-www/global/en_us/pdfs/literature/dp/arria-v/pcg-01013.pdf please check the pin connnection guideline. it may not reach por trip level to power on reset.
