Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

Altera USB-Blaster II Design

Hello, I was given instructions on building my own USB Blaster II from altera. They gave me the required drivers, a program to program the CPLD, as well as a .pof file they created to program the ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

Sorry about that. What i meant was while programming my board via a USB Blaster, i got the LED's to do what i wanted. When i try to program my board using the jtagmaxprog, i get that error. i tried creating a blank memory block using the megawizardplug in, and the IP component name "ALTUFM_NONE" but i still get the same error. Currently hae an open SR with altera, but they are very slow to answer, and even slower to give any useful advice.

-ryan