Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Altera USB-Blaster II Design

Hello, I was given instructions on building my own USB Blaster II from altera. They gave me the required drivers, a program to program the CPLD, as well as a .pof file they created to program the ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

That is correct. the MAx II CPLD we used was the EPM570GM100. And all we were given was .exe program they wrote that runs through the Quartus 12.0 interface, a .pof for the CPLD programming, and the drivers for binding prior to programming.

-ryan