Forum Discussion
Nicole04
Occasional Contributor
Occasional ContributorAgilex 5 E-Series Ethernet with 1588 via HPS EMAC
Good day, I would like to use the Hard Processor System (HPS) Ethernet Media Access Controller (EMAC) peripheral (with IEEE 1588) for a Gigabit Ethernet (GbE) port. I found the information for this ...
Hi,
Aik Eu is OOO.
Yes you can use the SGMII and SGMII+ using soft logic with the appropriate general purpose, TDS, or transceiver I/O resources. Reference-https://www.intel.com/content/www/us/en/docs/programmable/814346/24-1/phy-interface-01.html
You can also route the MDIO pin to FPGA and with shared MDIO interface for multiple PHY devices and their configuration and management.
Regards
Tiwari
Nicole04Occasional Contributor
Occasional ContributorHi,
How will the shared MDIO be set up in the platform manager for the TSE IP?
Is it better to use an MDIO EMAC for the HPS EMAC connected ethernet link?
