Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

about the CONF_DONE in the PS configuration

Dear all, I am trying to configure the Cyclone III device using the Passive Serial mode. In the very beginning, I draw the nCONFIG low, and subsequently the Cyclone III draw the nSTATUS low....the qu...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

The board currently is being used by the team with the EPCS4 prom loading the FPGA at startup. My board has been modified to move to loading it with the MPC8309. So we have been able to program it, but to reduce board cost we are moving the the micro loading it and removing the EPCS4. I am seeing if we still have JTAG access to try this method.