Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

about the CONF_DONE in the PS configuration

Dear all, I am trying to configure the Cyclone III device using the Passive Serial mode. In the very beginning, I draw the nCONFIG low, and subsequently the Cyclone III draw the nSTATUS low....the qu...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

Ok. I used the debug probe to read the flash two different ways.

Probe setup as little endian

0xfe50_0020 f7f7f76a f3f3f3f7 fbfaf3fb f9f9f1fa

Probe setup for big endian

0xfe50_0020 6af7f7f7 f7f3f3f3 fbf3fafb faf1f9f9

the same bytes when looking at the .rbf file in image attached.

so it looks fine big endian correct?

https://www.alteraforum.com/forum/attachment.php?attachmentid=7202