Altera_Forum
Honored Contributor
Honored Contributor3.372 MHz and 7.5Mhz and 4Khz
I need to generate clock for 3.372 Mhz, 7.5 MHz and 4 Khz. is this possible using dividers in the dE0 or the DE0 nano board?
Forum Discussion
Altera_ForumHonored Contributor
Honored ContributorYes that will work wonderfully...
I have never used any clock dividers yet, is there a reference page or a help you can guide me to? And also, i can run 64 Mhz clock and 50 Mhz clock on the same board right? Coz i need to generate a pulses of 3.372 Mhz and 7.5 MHz, both repeating itself at 4 KHz So i can just add another clock to the board?
