Forum Discussion

New Contributor

5 years ago

What programming cable supports the Cyclone EP2C5F256C8 device? I am using the USB Blaster and it doesn't seem to allowing me to program the device. The link below doesn't not list the Cyclone II.

https://www.intel.com/content/da

Super Contributor

5 years ago

Hi,

Thank you for contacting Intel community.

The link provided was broken.

By referring to USB Blaster Userguide(page 3) below, USB blaster do support Cyclone series. You may try to refer to our userguide.

Let me know if you need further information.

Regards,

Aiman

VLor0
New Contributor
5 years ago
Aiman, Thanks for the reply. I am trying to examine the checksum from the Cyclone EP2C5F256C8 device? However, when I do a auto detect in the programming mode it detects the device, but it will not allow me to select any of the features: examine, program, verify, etc..? Do you know why? Best Regards, Vue Lor | Engineer RDM Industrial Electronics, Inc. 850 Harmony Grove Rd. | Nebo, NC 28761 Phone: (800) 282-5183 | Fax: (828) 652-2697 Email: vue@rdm.net