Forum Discussion
RBrac5
New Contributor
New ContributorWe have run into an Ethernet issue on the stratix10sx-socdk board. Under heavy traffic conditions, Ethernet Rx DMA is hanging because the current Rx descriptor gets stuck in the RUNCLOSE state.
This is using the INTEGRITY OS. I have tried updating all of our EMAC DMA settings to exactly match the settings used in the latest Linux stmmac/dwmac1000 driver, but we still see the same issue. I ...
RBrac5New Contributor
New ContributorWe are not using Linux. This is the INTEGRITY RTOS. However, our EMAC DMA settings exactly match the DMA settings used in the latest Linux stmmac/dwmac1000 driver from https://github.com/altera-opensource/linux-socfpga/tree/master.
EBERLAZARE_I_Intel
Regular Contributor
Regular ContributorHi,
It seems that this case has been filed in IPS, I will set this case close.
Regards.
