Forum Discussion

Syouf's avatar
Syouf
Icon for New Contributor rankNew Contributor
5 years ago

Using external clock to drive FPGA DE10-Nano

Hello, I am working on a project in which I need to use the clock of DE2-115 to drive a DE10-Nano FPGA. I connected the clock signal of the DE2 to one of its GPIO pins, and connected that pin to a ...
JohnT_Altera's avatar
JohnT_Altera
Icon for Regular Contributor rankRegular Contributor
5 years ago

Hi,


Thanks for sharing the project file. From the project, I observed that you do not set any IO standard on the pin. Could you try to set the specific IO standard used for each pin?