Forum Discussion

dsun01's avatar
dsun01
Icon for Contributor rankContributor
4 years ago
Solved

USB3 on a10_soc_devkit

Hi Intel/Altera FPGA expert, I am working on a project to port a TI TSW14J56EVM (which is based on Arria 5, the key blocks are JESD, and USB3) to Arria 10. A good candidate is A10_soc_devkit, it h...
  • CheepinC_altera's avatar
    CheepinC_altera
    4 years ago

    Hi,


    As I understand it, you have some inquiries related to implementing USB 3.0 in the A10 SOC devkit. For your information, we support USB solution through our design partner. You may further engage with SLS at info@slscorp.com for further details on the USB support. Note that there will be charges for the solution.


    Please let me know if there is any concern. Thank you.



    Best regards,

    Chee Pin


dsun01's avatar
dsun01
Icon for Contributor rankContributor
4 years ago

thank you very much, we are evaluating go to PCIe directly. if it works, we don't need USB3, the bandwidth is not enough.

Pritesh's avatar
Pritesh
Icon for New Contributor rankNew Contributor
4 years ago

Hi,

This is Pritesh from SLS. I am writing this if you are still looking for FMC board to implement USB3 interface on A10 SoC Kit. If yes, please visit the product webpage https://www.slscorp.com/products/fmc-snap-on-boards/eusb-3-1-fmc.html for more information. Also, feel free to write your feedback here.

Regards,

Pritesh Kukadia