Forum Discussion

VDemc2's avatar
VDemc2
Icon for New Contributor rankNew Contributor
6 years ago

Stuck during execution on Mustang-F100-A10, Intel® Vision Accelerator Design with Intel® Arria® 10 FPGA

Hello, we have Mustang F100-A10 and TANK-870 AIoT Dev. Kit. We have followed the official guide for the latest openvino to setup the 2019R1 openvino and our FPGA card. We were able to run "aocl di...
JohnT_Altera's avatar
JohnT_Altera
Icon for Regular Contributor rankRegular Contributor
6 years ago

Hi,

Is that mean that you are also facing the same issue on 2019R1.1?

VDemc2's avatar
VDemc2
Icon for New Contributor rankNew Contributor
6 years ago

Yes we are facing the issue on 2019R1.1. We use the latest openvino.

Hovewer we haven't tried on 2019R1 (I thought R1.1 and R1 is almost the same so I incorrectly wrote 2019R1 in my original post). But I assume it wouldn't help.

We tried 2018R5, because our second FPGA, which we received and installed like 6months ago, worked well (we have 2 FPGAs, the new with the problem on 2019R1.1 and the second one - works well but not on the latest version of openvino)

Unfortunately with the new FPGA we were not able to call "aocl diagnose" with success message on 2018R1 version.