Forum Discussion

ml7's avatar
ml7
Icon for New Contributor rankNew Contributor
5 years ago
Solved

Stratix-10 SoC JTAG ID Error Code

I am currently attempting to reflash the GHRD on the Stratix-10 SoC Development board. When using the .jic supplied by RocketBoards.org, I receive the following error message (attached). When I loo...
  • EBERLAZARE_I_Intel's avatar
    EBERLAZARE_I_Intel
    5 years ago

    Hi,

    Yes, you need to in order to program the board correctly.

ml7's avatar
ml7
Icon for New Contributor rankNew Contributor
5 years ago

Thank you for your response. I am now able to generate the GHRD using the makefile with the QUARTUS_DEVICE ?= 1SX280HU1F50E2VG. The issue now comes down to the JTAG ID that lists the part as the following: C322D0DD 1SX280HH1(.|S3)/1SX280HH2/..

So does the flash_loader need to be set to 1sx280hh1? Does the part ID also have to be set to HH1 in the Quartus project?

EBERLAZARE_I_Intel's avatar
EBERLAZARE_I_Intel
Icon for Regular Contributor rankRegular Contributor
5 years ago

Hi,

Yes, you need to in order to program the board correctly.