Regarding Cyclone V GT development kit. I want to know is there a way to trigger a software reset for this device?

Hi PCHIN2,

The reset button is meant for FPGA logic and MAX V reset. May i know what is the reason for software reset?

If you are having issue to boot the FPGA, you may try to restore the Flash Device to the Factory Settings by following the guide at link below:

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_cvgt_fpga_dev_kit.pdf (Page 18)

Regards,

YL