Forum Discussion

JDowd3's avatar
JDowd3
Icon for New Contributor rankNew Contributor
6 years ago

Programming Cyclone 5CEBA2F17 with SVF fails

I have created an SVF file using the Quartus programmer. I have a CPU then the FPGA in the JTAG chain. When I run the SVF file using JTAG's SVF player I see my LEDs light briefly (so the pins are g...
JDowd3's avatar
JDowd3
Icon for New Contributor rankNew Contributor
6 years ago

Hello and thanks for answering. I had closed this case because I managed to fix it.

I am still using Quartus 14. I am using a third-party JTAG test tool to do the programming.

It did not work when I added the extra device just by specifying the IR length. I don't know if it was something I did wrong, but it works now that I have imported the BSDL file for the other device.

Thanks, John