Forum Discussion

zhangyi17's avatar
zhangyi17
Icon for New Contributor rankNew Contributor
7 years ago

Problem following I2C Remote System Upgrade Example (Max 10)

Hello Everybody. I am an old timer from the Altera Forum. First timer posted on the Intel Forum. I've been trying to follow the I2C Remote System Upgrade Example (Max 10) for a week now (see attach...
Ahmed_H_Intel1's avatar
Ahmed_H_Intel1
Icon for Frequent Contributor rankFrequent Contributor
7 years ago

You must check SW2 for example it has a pin to choose CFM0, CFM1 or CFM2 image as the first boot image in dual-image configu‐ ration. If the CONFIG_ SEL is set to low, the first boot image is CFM0 image. If CONFIG_SEL is set o high, the first boot image is CFM1 or CFM2 image. This pin is read before user mode and before the nSTATUS pin is asserted

Please check this page:

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/products/devkits/altera/documents/10M50_evaluation_board_userguide.pdf#page=9