Forum Discussion

New Contributor

6 years ago

Passive parallel asynchronous Configuration supported FPGA devices

Hi, In our old design we have used "EP1K50FI256-2" FPGA, which is not available now (EOL). This FPGA is configured as PPA mode (Passive Parallel Asynchronous). While searching "ACEX® 1K" migration p...

ShafiqY_Intel

Frequent Contributor

6 years ago

Hi SThat5,

MAX V device did not support PPA mode.

However, you can configure the MAX V device in passive serial (PS) or fast passive parallel (FPP) scheme.

You may refer to following user guide for more details.

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_pfl.pdf

Cheers

Forum Discussion

Passive parallel asynchronous Configuration supported FPGA devices

Recent Discussions

Agilex5 Eagle ES, NIOS-V + TSE IP

CXL 2.0 support on the NEW Agilex™ 7 FPGA I-Series Development Kit (2x R-Tile and 1x F-Tile)

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).

Slow Runtime Performance in FIL Implementation on DE2-115 Using Ethernet

Agilex5 HPS2FPGA usage