Forum Discussion

New Contributor

6 years ago

On the Arria 10 GX FPGA Development kit I am able to load the qts_pcie.sof using the "Arria10 FPGA Board Test System" (BTS) application, but afterwards it is not recognized by the BTS. Also I can not find it in Windows 10 or Linux.

On the Arria 10 GX FPGA Development kit I am able to load the qts_pcie.sof using the "Arria10 FPGA Board Test System" (BTS) application, but afterwards it is not recognized by the BTS. Infact none ...

SengKok_L_Intel

Regular Contributor

6 years ago

The AN456-2.5 should work. Alternatively, you can follow the user guide below to generate the design example from PCIe IP guide for A10 devkit. We have tested it and it works well.

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug-dex-a10-pcie-avst.pdf

Regards -SK

Forum Discussion

On the Arria 10 GX FPGA Development kit I am able to load the qts_pcie.sof using the "Arria10 FPGA Board Test System" (BTS) application, but afterwards it is not recognized by the BTS. Also I can not find it in Windows 10 or Linux.

Recent Discussions

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).

Slow Runtime Performance in FIL Implementation on DE2-115 Using Ethernet

CXL 2.0 support on the NEW Agilex™ 7 FPGA I-Series Development Kit (2x R-Tile and 1x F-Tile)

Agilex5 HPS2FPGA usage

Mandelbrot viewer on Cyclone V - Platform Designer layout