Forum Discussion

Pavithran_G's avatar
Pavithran_G
Icon for New Contributor rankNew Contributor
4 years ago

Max 10 FPGA unused pin connection

Hi, We are using MAX 10 FPGA for our design , We are not using all pins, were we need to connect the unused pin ? shall we keep unused pin in floating ? Here I am attaching un used pin detail...
AminT_Intel's avatar
AminT_Intel
Icon for Regular Contributor rankRegular Contributor
4 years ago

Hello,

Please also refer to this document: https://d2pgu9s4sfmw1s.cloudfront.net/DITA-technical-publications/PROD/PSG/ug_m10_gpio-18-1-683751-704622.pdf?Expires=1644296594&Key-Pair-Id=APKAJKRNIMMSNYXST6UA&Signature=CVVN9YSxnU9UcsBa18V7qP9GRg2CtqlvnJgzzE3~0ZHWxLk7WCHfnDtp4ZDtwQfv8EQ-xKkSVjJmrsumAMfVhykP8x8HoumsdZA1NeNRIM3Hnl03lCrA~5vs4o3GZLCBQVjGM5dSKNEf5CeYXjaACf258JbHjUYjaWMlUZpSsyaPAwZFvxARa~ognSJIDEeHLnWN2AWQyg-vzGXKYxNJ0dvcZkc5oWUeaLnZxG5hbcCKANPfQQ46vKM86WIYoJKU1bc4~NWm8f9iY5~gTCmciQEMmvfbyVAUd-88fQyqiKk-23sSsPRNBNo1cyzB1A7tabXxtZubxlkjEHPXExuIvA__

Thanks.

  • Pavithran_G's avatar
    Pavithran_G
    Icon for New Contributor rankNew Contributor
    4 years ago

    Hello ,

    The given link is not opening its showing some error , can you please share the valid link again .

    Thanks,

    Pavithran G

      • AminT_Intel's avatar
        AminT_Intel
        Icon for Regular Contributor rankRegular Contributor
        4 years ago

        We do not receive any response from you to the previous question/reply/answer that I have provided. This thread will be transitioned to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you.