Forum Discussion

JGeor12's avatar
JGeor12
Icon for New Contributor rankNew Contributor
6 years ago

I am working with the cyclone V device.Currently i am processing the lvds signals.

The major problem is, i cannot route the input lvds signal between the input to the LVDS_RX IP and input to the lcd externally connected at the same time.Either as input to the lcd or IP is possible....
SreekumarR_G_Intel's avatar
SreekumarR_G_Intel
Icon for Frequent Contributor rankFrequent Contributor
6 years ago

I am not getting your question ; You were saying you are not able to connect the output of the LVDS IP to your LCD ?

Would it possible to share the deisgn to check quickly ?

Thank you ,

Regards,

Sree

  • JGeor12's avatar
    JGeor12
    Icon for New Contributor rankNew Contributor
    6 years ago

    The output of ip is not connected to the lcd. The input of this lcd is lvds signals.So here the problems is , i can't give lvds signals as input to RX ip and LCD at the same time.only one is possible.