Forum Discussion

WKUAN's avatar
WKUAN
Icon for New Contributor rankNew Contributor
4 years ago

How to instaniate a SFL ip core in the design

Hello, I am using ARRIA10 with EPCQL1024, now the ARRIA10 is ok, the SOF can be configured into the FPGA, but when I configure the EPCQ1024 with JIC file, the configuration failed. After read an...
YuanLi_S_Intel's avatar
YuanLi_S_Intel
Icon for Regular Contributor rankRegular Contributor
4 years ago

Hi Kuang Wu,


This is confusing. But by right you will be able to select the appropriate device ordering number in signal tab after the JTAG is ready.


Thank You


  • WKUAN's avatar
    WKUAN
    Icon for New Contributor rankNew Contributor
    4 years ago

    Hi Bruce, it is great to hear that the device can be selected in signaltap, but i can not find the signal tab, I use Quartus prime version16.1.0, is the version ok? could you please share a picture with me, thank you.

  • WKUAN's avatar
    WKUAN
    Icon for New Contributor rankNew Contributor
    4 years ago

    Hi Bruce，

    Error (12852): Data integrity error is detected during JTAG communication. The SignalTap result is not trustworthy. Please check the JTAG chain.

    this is the echo of quartus.

    Thank you