Forum Discussion

NSook's avatar
NSook
Icon for New Contributor rankNew Contributor
6 years ago

How to get USB Blaster II under Programmer in Quartus Prime Lite?

I'm currently trying to set up the USB Blaster II for a Max 10 10M08 Evaluation Kit using Ubuntu ran on Virtualbox. On terminal, it says that the USB blaster is connected (using lsusb). I've also cre...
NSook's avatar
NSook
Icon for New Contributor rankNew Contributor
6 years ago

Yes I did that and it still doesn't work. Thanks for the assistance so far.

ShafiqY_Intel's avatar
ShafiqY_Intel
Icon for Frequent Contributor rankFrequent Contributor
6 years ago

Please allow me some time to look in to this.

Thanks

  • NSook's avatar
    NSook
    Icon for New Contributor rankNew Contributor
    6 years ago

    Sure! No problem.

  • ShafiqY_Intel's avatar
    ShafiqY_Intel
    Icon for Frequent Contributor rankFrequent Contributor
    6 years ago

    Hi NSook,

    can you try this?

    $ cd /etc/udev/rules.d

    $ sudo gedit 51-usbblaster.rules

    (Copy below text & paste & save it.)

    # USB-Blaster

    BUS=="usb", SYSFS{idVendor}=="09fb", SYSFS{idProduct}=="6001", MODE="0666"

    BUS=="usb", SYSFS{idVendor}=="09fb", SYSFS{idProduct}=="6002", MODE="0666"

    BUS=="usb", SYSFS{idVendor}=="09fb", SYSFS{idProduct}=="6003", MODE="0666"

    # USB-Blaster II

    BUS=="usb", SYSFS{idVendor}=="09fb", SYSFS{idProduct}=="6010", MODE="0666"

    BUS=="usb", SYSFS{idVendor}=="09fb", SYSFS{idProduct}=="6810", MODE="0666"

    $ cd /etc/udev/rules.d

    $ sudo gedit 92-usbblaster.rules

    (Copy below text & paste & save it.)

    # USB-Blaster

    SUBSYSTEM=="usb", ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6001", MODE="0666"

    SUBSYSTEM=="usb", ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6002", MODE="0666"

    SUBSYSTEM=="usb", ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6003", MODE="0666"

    # USB-Blaster II

    SUBSYSTEM=="usb", ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6010", MODE="0666"

    SUBSYSTEM=="usb", ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6810", MODE="0666"