ESD Specification for EP2C8Q208I8N

Question

We are looking for ESD specification and if this part EP2C8Q208I8N should be handled with ESD protection. Can you advise?

amint_intel · Answer

Hello,

You can obtain information about ESD from Reliability Report.

Thank you

ah-caes · Answer

Can you advise the link to download this Reliability report?

amint_intel · Answer

Hi,

You will need CNDA with Intel to request for Reliability Report. Do you have CNDA with us?

Thank you.

ah-caes · Answer

sorry I think I went to the wrong direction on this. The original request was to confirm if this part need to be handled with ESD protection or not.  Per Mouser, this part doesn't required ESD package but our Quality believes this part needed.  Can you just validate if this part required ESD protection when handling or not? I don't need the detail reliability report.

thanks,

amint_intel · Answer

Hello,

ESD is not selective when affecting your products. It can strike components directly or indirectly by passing to the component via connectors and cables.Intel implemented a comprehensive ESD prevention program to ensure that our product are delivered to customers with the highest possible reliability.
 
All of our families need to maintain ESD HBM JESD22-A114 Mil Std 3015.7 and ESD Charged Device Model JESD22-C101 that are part of JES standard. This is pointed in below re-ability report. For precise information about requirements I would suggest to review particular standards material.  Table II: Reliability Qualification Requirements
 
Intel has implemented a comprehensive ESD prevention program to ensure that our product are delivered to customers with the highest possible reliability.
 
https://www.intel.com/content/www/us/en/quality/ch3-esd-eos-guide.html
 
Thank you.

Forum Discussion

ESD Specification for EP2C8Q208I8N

6 Replies

Recent Discussions

Mandelbrot viewer on Cyclone V - Platform Designer layout

Stratix 10 FPGA Dev Kit VCCIO_FMC voltage issue

Failed to get MAX10 Triple Speed Ethernet example design to compile

A question about reading the configuration space of the R-Tile PCIe IP EP

nCONFIG and nSTATUS,CONF_DONE always LOW EP4CE6