Forum Discussion

RFett's avatar
RFett
Icon for New Contributor rankNew Contributor
6 years ago

Error on attempt to download sof and jic file to Cyclon 10GX dev. board using JTAG. How to proper setup to get jic file programmed to EPCQL1024?

Using the C10 CVP sample project I added the Serial Flash Loader IP to the design into the top_hw.v. I setup the jtag chain for the Cyclon 10 GX Dev. Kit, download the 10 design (sof) -> ok and down...
JohnT_Altera's avatar
JohnT_Altera
Icon for Regular Contributor rankRegular Contributor
6 years ago

Hi,

I observed that you are still not programming the SFL image into the Cyclone 10 GX device. Below is the screenshot that you should observed.