Forum Discussion

Anup_Agarwal's avatar
Anup_Agarwal
Icon for New Contributor rankNew Contributor
4 years ago
Solved

Does N3000-N PAC support partial reconfiguration

I read in the data sheet (https://www.intel.com/content/www/us/en/programmable/documentation/dlq1585950463484.html#version😞 "The Intel ® FPGA PAC N3000-N does not support partial reconfiguration. ...
  • Wincent_Altera's avatar
    Wincent_Altera
    4 years ago

    Hi,

    Support for partial reconfiguration (PR) on the N3000 is technically possible.
    However,     Intel provided N3000 FPGA design and OPAE software do not support PR.
    The Intel engineering team     chose not to support PR on N3000 because:

    1. Most customer use cases did not require PR
    2. Implementing PR would require additional time
    3. Implementing PR added project risk

    If your application requires PR, the Intel FPGA PAC for Arria 10 GX is similar to the N3000
    and does support PR.


    Please let me know if this answer covers your inquiry.
    Regards,

    WeiChuan_C_Intel

Wincent_Altera's avatar
Wincent_Altera
Icon for Regular Contributor rankRegular Contributor
4 years ago

Hi,

Support for partial reconfiguration (PR) on the N3000 is technically possible.
However, Intel provided N3000 FPGA design and OPAE software do not support PR.
The Intel engineering team chose not to support PR on N3000 because:

  1. Most customer use cases did not require PR
  2. Implementing PR would require additional time
  3. Implementing PR added project risk

If your application requires PR, the Intel FPGA PAC for Arria 10 GX is similar to the N3000
and does support PR.


Please let me know if this answer covers your inquiry.
Regards,

WeiChuan_C_Intel