Core Power cost of C10LP 10CL040YU484C6G

Question

Dear Sir/Madam​Could you help to check ​the Core power cost of 10CL040YU484C6G? I'm  using the 1.2V /1.5A(max) power to supply it, not sure it's enough or not.Thanks Ted.Gao

yuanli_s_intel · Answer

Hi Ted,The core voltage, VCCINT can be 1.2V / 1.0V. As long as your supply voltage is meeting these requirement, it would be ok to use it.https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/cyclone-10/c10lp-51002.pdfThank You.

tgao · Answer

Hi SooY，

Thanks for your reply. What I’m worried about is not Voltage, is Current. I’m not sure the 1.5A is enough or not. Do you have same evidence on handbook or papers about the current?

Ted

yuanli_s_intel · Answer

Hi Ted,I believe it should be ok. However, to check the total current drawn, you may use our estimator tool available at link below:https://www.intel.com/content/www/us/en/programmable/support/support-resources/operation-and-testing/power/c10-lp-power_estimator_download.htmlThank You

tgao · Answer

Hi SooY,

Thanks, Noted it.

Forum Discussion

Core Power cost of C10LP 10CL040YU484C6G

4 Replies

Recent Discussions

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).

Mandelbrot viewer on Cyclone V - Platform Designer layout

Slow Runtime Performance in FIL Implementation on DE2-115 Using Ethernet

Stratix 10 GX SI Board - issue with the Board Test System (BTS)

Stratix 10 Development Kit HiLo connector