Forum Discussion

New Contributor

7 years ago

Solved

At boot time Cyclone V from nand, gpio HPS not controlled

Hello! At boot time Cyclone V from nand, gpio HPS not controlled, GPIO29 and GPIO30 HPS set logic "1", it lasts ~ 8 seconds. GPIO29(30) HPS set "1" via 170 msecond after set up nPOR , and GPIO29(30)...

AKirv
7 years ago
Problem solved https://www.intel.com/content/www/us/en/programmable/support/support-resources/knowledge-base/solutions/rd12312014_593.html

AKirv

New Contributor

7 years ago

Problem solved https://www.intel.com/content/www/us/en/programmable/support/support-resources/knowledge-base/solutions/rd12312014_593.html

Forum Discussion

At boot time Cyclone V from nand, gpio HPS not controlled

Recent Discussions

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).

Slow Runtime Performance in FIL Implementation on DE2-115 Using Ethernet

CXL 2.0 support on the NEW Agilex™ 7 FPGA I-Series Development Kit (2x R-Tile and 1x F-Tile)

Agilex5 HPS2FPGA usage

Mandelbrot viewer on Cyclone V - Platform Designer layout