Forum Discussion

New Contributor

5 years ago

Arria V GX with HSMC Debug Header Pins

Hi, I have the Arria V GX starter kit and I would like to connect a microphone breakout board to the HSMC debug header. I do not understand how the 40 pins on the HSMC debug header translate to the...

Deshi_Intel

Regular Contributor

5 years ago

HI,

Are you referring to the HSMC connector on starter kit board ?

You can always refer to board schematic doc available in "kit installation" to trace the connection on which FPGA pin is connected to which HSMC pin.

https://www.intel.com/content/www/us/en/programmable/products/boards_and_kits/dev-kits/altera/kit-arria-v-starter.html

Thanks.

Regards,

dlim

jlanier

New Contributor

5 years ago

I'm actually interested in the Debug board pins. There are 40 and I'm wondering if I can use them as GPIO. I'm trying to hook up a microphone so I will need a Clk, Data, GND, and 3.3V. I know there are 2 GND pins on the Debug board but I am unsure what the other pins are capable of.

Forum Discussion

Arria V GX with HSMC Debug Header Pins

Recent Discussions

Mandelbrot viewer on Cyclone V - Platform Designer layout

Slow Runtime Performance in FIL Implementation on DE2-115 Using Ethernet

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).

Stratix 10 GX SI Board - issue with the Board Test System (BTS)

Stratix 10 Development Kit HiLo connector