Forum Discussion

cbhowmik's avatar
cbhowmik
Icon for New Contributor rankNew Contributor
4 years ago

Agilex FSeries Dev Kit: Error (213013): Programming hardware cable not detected

I get this error while trying to program the QSPI flash on my Agilex FSeries Transceiver Dev kit: cd $TOP_FOLDER ~/intelFPGA_pro/21.3/nios2eds/nios2_command_shell.sh \ quartus_pgm -c 1 -m jtag -o...
cbhowmik's avatar
cbhowmik
Icon for New Contributor rankNew Contributor
4 years ago

I finally made this work somehow. I set the other switches to the configuration described in this document (https://rocketboards.org/foswiki/Documentation/AgilexSoCGSRD#Creating_SD_Card)

Then the board switches need to be configured as follows:

  • SW1: ON-OFF-OFF-ON
  • SW2: all OFF
  • SW3: OFF-OFF-ON-ON-ON-ON
  • SW4: OFF-OFF-OFF-ON
  • SW5: all OFF
  • SW6: OFF-OFF-OFF-ON
  • SW9: OFF-OFF
  • SW10: OFF-ON
  • and then changed SW1 to OFF/OFF/OFF/ON.