Forum Discussion

New Contributor

6 years ago

.pof file generation for Flex 6000 with EPC2 configuration

Hi, I was using Flex 6000, EPF6016ATC100-3 with EPC2 device and Altera Quartus II v9.0. I have a .pof file for this fpga which is configured in EPC2 device, which i can able to program into the boa...

ShafiqY_Intel

Frequent Contributor

6 years ago

Hi RT0001,

I don't have much information since this is old device.

Based on Configuration Device Datasheet, Flex 6000 doesn't support EPC2 device.

You can refer to the following datasheet for more details (Page 4):

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/cfg/cfg_cf52004.pdf#page=4

Thanks

Forum Discussion

.pof file generation for Flex 6000 with EPC2 configuration

Recent Discussions

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).

Mandelbrot viewer on Cyclone V - Platform Designer layout

Slow Runtime Performance in FIL Implementation on DE2-115 Using Ethernet

Stratix 10 GX SI Board - issue with the Board Test System (BTS)

Stratix 10 Development Kit HiLo connector