BigSid
Occasional ContributorJoined 5 years ago
User Profile
Occasional Contributor
User Widgets
Contributions
Re: Programming the Arria 10 GX FPGA Development Kit
Hi, I've put development board switch SW4-2 in the ON position to disable the MAX V in the JTAG chain as described in the kit user guide: However, the programmer still fails to configure the Arria 10: Error (209015): Can't configure device. Expected JTAG ID code 0x02E660DD for device 1, but found JTAG ID code 0x020A30DD. Make sure the location of the target device on the circuit board matches the device's location in the device chain in the Chain Description File (.cdf). And the MAX V still shows up in the JTAG chain: Any ideas? Thanks.Re: Programming the Arria 10 GX FPGA Development Kit
The error description I'm getting is this: Error (209015): Can't configure device. Expected JTAG ID code 0x02E660DD for device 1, but found JTAG ID code 0x020A30DD. Make sure the location of the target device on the circuit board matches the device's location in the device chain in the Chain Description File (.cdf). Code 0x020A30DD is for a 5M1270Z MAX V device. This is not the device I selected for the file (10AX115S2F45I1SG) and doesn't appear to be anywhere on the Arria 10 GX FPGA Development Kit I'm using. How is the programmer finding this?
