Stratix® Device Handbook: Known Issues

Description

Issue 132933: Volume 2, Chapter 11 Configuring Stratix & Stratix GX Devices, Version 3.2

Table 11–15 incorrectly states "When using EPC2 devices, only external 10-k. pull-up resistors should be used." in the descriptions for nSTATUS and CONF_DONE.  This is for EPC1 devices, not for EPC2 devices.  The table should say "When using EPC1 devices, only external 10-k. pull-up resistors should be used." with respect to  nSTATUS and CONF_DONE.