Most RecentWhy is the TXPLL or CDR unable to achieve lock to reference clock for Agilex™ 5 FPGA designs, which have GTS transceivers and HPS EMIF enabled when using bitstream compiled and generated in the Quartus® Prime Pro Edition Software version 23.4.1 and 24.1?Why does the tx_pll_locked port fail to assert on the Intel Agilex® 7 F-Tile PMA-based high-speed IP after dynamically reconfiguring the channel to another profile?Why are there timing violations within the Triple-Speed Ethernet Intel® FPGA IP implemented on the F-Tile of Intel Agilex® 7 FPGA devices?Why does analysis & synthesis fail in the Intel® Quartus® Prime Pro Edition Software when the project contains multiple instances of the E-Tile Hard IP for Ethernet Intel® FPGA IP with Dynamic Reconfiguration(DR) mode?Why do the Intel Agilex® 7 F-Series & I-Series HPS devices freeze when loading an image?Why does the Intel Agilex® 7 F-Tile device tx_pll_locked signal fail to assert when OSC_CLK_1 is used as the configuration clock source?Why does Intel® Quartus® report a warning message when using the "initialize memory content" option for an on-chip memory (RAM or ROM) FPGA IP?Why do I see timing violations in the F-Tile Reference and System PLL Clocks Intel FPGA IP when using Intel® Quartus® Prime Pro Edition Software version 23.2 in Intel Agilex® 7 devices?Why is my design failing when I instantiated the Configuration Clock IP in the Quartus® Prime Pro Edition Software version 24.3.1?Why does the Nios® V processor force Configuration Scheme with Memory Initialization for MAX® 10 FPGA?
