Info: *******************************************************************
Info: Running Quartus II 64-Bit Analysis & Synthesis
	Info: Version 13.0.1 Build 232 06/12/2013 Service Pack 1 SJ Web Edition
	Info: Processing started: Thu Dec 17 08:09:05 2015
	Info: Version 13.0.1 Build 232 06/12/2013 Service Pack 1 SJ Web Edition
	Info: Processing started: Thu Dec 17 08:09:05 2015
Info: Command: quartus_map --read_settings_files=on --write_settings_files=off mcpx5max2 -c mcpx5max2
Warning (20028): Parallel compilation is not licensed and has been disabled
Info (12021): Found 1 design units, including 1 entities, in source file mcpx5max2.bdf
	Info (12023): Found entity 1: mcpx5max2
	Info (12023): Found entity 1: mcpx5max2
Info (12021): Found 1 design units, including 1 entities, in source file mio193.bdf
	Info (12023): Found entity 1: MIO193
	Info (12023): Found entity 1: MIO193
Info (12021): Found 1 design units, including 1 entities, in source file mio193b.bdf
	Info (12023): Found entity 1: MIO193B
	Info (12023): Found entity 1: MIO193B
Info (12127): Elaborating entity "mcpx5max2" for the top level hierarchy
Warning (275009): Pin "CLK2" not connected
Warning (275008): Primitive "AND2" of instance "inst216" not used
Warning (275008): Primitive "AND2" of instance "inst217" not used
Warning (275008): Primitive "AND2" of instance "inst218" not used
Warning (275008): Primitive "NAND3" of instance "inst272" not used
Warning (275008): Primitive "NOT" of instance "inst66" not used
Info (12128): Elaborating entity "74174" for hierarchy "74174:inst63"
Info (12130): Elaborated megafunction instantiation "74174:inst63"
Info (12128): Elaborating entity "74244" for hierarchy "74244:inst257"
Info (12130): Elaborated megafunction instantiation "74244:inst257"
Info (12128): Elaborating entity "7404" for hierarchy "7404:inst29"
Info (12130): Elaborated megafunction instantiation "7404:inst29"
Info (12128): Elaborating entity "74175" for hierarchy "74175:inst15"
Info (12130): Elaborated megafunction instantiation "74175:inst15"
Info (12128): Elaborating entity "DFF2" for hierarchy "DFF2:inst56"
Info (12130): Elaborated megafunction instantiation "DFF2:inst56"
Info (12128): Elaborating entity "74138" for hierarchy "74138:inst81"
Info (12130): Elaborated megafunction instantiation "74138:inst81"
Info (12128): Elaborating entity "74193" for hierarchy "74193:inst240"
Info (12130): Elaborated megafunction instantiation "74193:inst240"
Info (12128): Elaborating entity "74374" for hierarchy "74374:inst4"
Info (12130): Elaborated megafunction instantiation "74374:inst4"
Info (12128): Elaborating entity "btri" for hierarchy "btri:inst134"
Info (12130): Elaborated megafunction instantiation "btri:inst134"
Warning (19016): Clock multiplexers are found and protected
	Warning (19017): Found clock multiplexer 74193:inst240|93~synth
	Warning (19017): Found clock multiplexer 74193:inst226|93~synth
	Warning (19017): Found clock multiplexer 74193:inst213|93~synth
	Warning (19017): Found clock multiplexer 74193:inst214|93~synth
	Warning (19017): Found clock multiplexer 74193:inst219|93~synth
	Warning (19017): Found clock multiplexer 74193:inst229|93~synth
	Warning (19017): Found clock multiplexer 74193:inst231|93~synth
	Warning (19017): Found clock multiplexer 74193:inst241|93~synth
	Warning (19017): Found clock multiplexer 74193:inst246|93~synth
	Warning (19017): Found clock multiplexer 74193:inst215|93~synth
	Warning (19017): Found clock multiplexer 74193:inst230|93~synth
	Warning (19017): Found clock multiplexer 74193:inst245|93~synth
	Warning (19017): Found clock multiplexer 74193:inst240|93~synth
	Warning (19017): Found clock multiplexer 74193:inst226|93~synth
	Warning (19017): Found clock multiplexer 74193:inst213|93~synth
	Warning (19017): Found clock multiplexer 74193:inst214|93~synth
	Warning (19017): Found clock multiplexer 74193:inst219|93~synth
	Warning (19017): Found clock multiplexer 74193:inst229|93~synth
	Warning (19017): Found clock multiplexer 74193:inst231|93~synth
	Warning (19017): Found clock multiplexer 74193:inst241|93~synth
	Warning (19017): Found clock multiplexer 74193:inst246|93~synth
	Warning (19017): Found clock multiplexer 74193:inst215|93~synth
	Warning (19017): Found clock multiplexer 74193:inst230|93~synth
	Warning (19017): Found clock multiplexer 74193:inst245|93~synth
Warning (13024): Output pins are stuck at VCC or GND
	Warning (13410): Pin "pin_name1" is stuck at VCC
	Warning (13410): Pin "pin_name2" is stuck at VCC
	Warning (13410): Pin "pin_name3" is stuck at VCC
	Warning (13410): Pin "pin_name1" is stuck at VCC
	Warning (13410): Pin "pin_name2" is stuck at VCC
	Warning (13410): Pin "pin_name3" is stuck at VCC
Info (18000): Registers with preset signals will power-up high
Warning (21074): Design contains 1 input pin(s) that do not drive logic
	Warning (15610): No output dependent on input pin "CLK2"
	Warning (15610): No output dependent on input pin "CLK2"
Info (21057): Implemented 526 device resources after synthesis - the final resource count might be different
	Info (21058): Implemented 26 input pins
	Info (21059): Implemented 32 output pins
	Info (21060): Implemented 8 bidirectional pins
	Info (21061): Implemented 460 logic cells
	Info (21058): Implemented 26 input pins
	Info (21059): Implemented 32 output pins
	Info (21060): Implemented 8 bidirectional pins
	Info (21061): Implemented 460 logic cells
Info: Quartus II 64-Bit Analysis & Synthesis was successful. 0 errors, 26 warnings
	Info: Peak virtual memory: 427 megabytes
	Info: Processing ended: Thu Dec 17 08:09:13 2015
	Info: Elapsed time: 00:00:08
	Info: Total CPU time (on all processors): 00:00:04
	Info: Peak virtual memory: 427 megabytes
	Info: Processing ended: Thu Dec 17 08:09:13 2015
	Info: Elapsed time: 00:00:08
	Info: Total CPU time (on all processors): 00:00:04
Info: *******************************************************************
Info: Running Quartus II 64-Bit Fitter
	Info: Version 13.0.1 Build 232 06/12/2013 Service Pack 1 SJ Web Edition
	Info: Processing started: Thu Dec 17 08:09:15 2015
	Info: Version 13.0.1 Build 232 06/12/2013 Service Pack 1 SJ Web Edition
	Info: Processing started: Thu Dec 17 08:09:15 2015
Info: Command: quartus_fit --read_settings_files=off --write_settings_files=off mcpx5max2 -c mcpx5max2
Info: qfit2_default_script.tcl version: #1
Info: Project  = mcpx5max2
Info: Revision = mcpx5max2
Warning (20028): Parallel compilation is not licensed and has been disabled
Info (119006): Selected device EPM570T100C5 for design "mcpx5max2"
Info (21077): Low junction temperature is 0 degrees C
Info (21077): High junction temperature is 85 degrees C
Info (171003): Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time
Warning (292013): Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature.
Info (176444): Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices
	Info (176445): Device EPM240T100C5 is compatible
	Info (176445): Device EPM240T100I5 is compatible
	Info (176445): Device EPM240T100A5 is compatible
	Info (176445): Device EPM570T100I5 is compatible
	Info (176445): Device EPM570T100A5 is compatible
	Info (176445): Device EPM240T100C5 is compatible
	Info (176445): Device EPM240T100I5 is compatible
	Info (176445): Device EPM240T100A5 is compatible
	Info (176445): Device EPM570T100I5 is compatible
	Info (176445): Device EPM570T100A5 is compatible
Info (169124): Fitter converted 1 user pins into dedicated programming pins
	Info (169125): Pin ~DEV_CLRn~ is reserved at location 44
	Info (169125): Pin ~DEV_CLRn~ is reserved at location 44
Info (332104): Reading SDC File: '//MARIO/scambio/mcpx5Max2 pre/SDC3.sdc'
Warning (332153): Family doesn't support jitter analysis.
Warning (332125): Found combinational loop of 2 nodes
	Warning (332126): Node "inst142~1|combout"
	Warning (332126): Node "inst142~1|datab"
	Warning (332126): Node "inst142~1|combout"
	Warning (332126): Node "inst142~1|datab"
Warning (332060): Node: A0 was determined to be a clock but was found without an associated clock assignment.
Warning (332060): Node: NCSE was determined to be a clock but was found without an associated clock assignment.
Warning (332060): Node: 74175:inst15|14 was determined to be a clock but was found without an associated clock assignment.
Warning (332060): Node: 74175:inst15|16 was determined to be a clock but was found without an associated clock assignment.
Warning (332060): Node: 74175:inst15|15 was determined to be a clock but was found without an associated clock assignment.
Warning (332060): Node: inst138 was determined to be a clock but was found without an associated clock assignment.
Warning (332060): Node: inst201 was determined to be a clock but was found without an associated clock assignment.
Warning (332060): Node: inst148 was determined to be a clock but was found without an associated clock assignment.
Warning (332060): Node: inst189 was determined to be a clock but was found without an associated clock assignment.
Info (332129): Detected timing requirements -- optimizing circuit to achieve only the specified requirements
Info (332111): Found 1 clocks
	Info (332111):   Period   Clock Name
	Info (332111): ======== ============
	Info (332111):   41.666          CLK
	Info (332111):   Period   Clock Name
	Info (332111): ======== ============
	Info (332111):   41.666          CLK
Info (186079): Completed User Assigned Global Signals Promotion Operation
Info (186216): Automatically promoted some destinations of signal "CLK" to use Global clock in PIN 12
	Info (186217): Destination "74138:inst82|1" may be non-global or may not use global clock
	Info (186217): Destination "inst6" may be non-global or may not use global clock
	Info (186217): Destination "inst7" may be non-global or may not use global clock
	Info (186217): Destination "inst203" may be non-global or may not use global clock
	Info (186217): Destination "74138:inst82|1" may be non-global or may not use global clock
	Info (186217): Destination "inst6" may be non-global or may not use global clock
	Info (186217): Destination "inst7" may be non-global or may not use global clock
	Info (186217): Destination "inst203" may be non-global or may not use global clock
Info (186216): Automatically promoted some destinations of signal "inst138" to use Global clock
	Info (186217): Destination "FRZE-" may be non-global or may not use global clock
	Info (186217): Destination "FRZE-" may be non-global or may not use global clock
Info (186216): Automatically promoted some destinations of signal "inst46" to use Global clock
	Info (186217): Destination "MSB-" may be non-global or may not use global clock
	Info (186217): Destination "MSB-" may be non-global or may not use global clock
Info (186216): Automatically promoted some destinations of signal "inst136" to use Global clock
	Info (186217): Destination "inst204" may be non-global or may not use global clock
	Info (186217): Destination "inst27" may be non-global or may not use global clock
	Info (186217): Destination "inst43" may be non-global or may not use global clock
	Info (186217): Destination "inst204" may be non-global or may not use global clock
	Info (186217): Destination "inst27" may be non-global or may not use global clock
	Info (186217): Destination "inst43" may be non-global or may not use global clock
Info (186079): Completed Auto Global Promotion Operation
Info (176234): Starting register packing
Info (186391): Fitter is using Normal packing mode for logic elements with Auto setting for Auto Packed Registers logic option
Info (186468): Started processing fast register assignments
Info (186469): Finished processing fast register assignments
Info (176235): Finished register packing
Info (171121): Fitter preparation operations ending: elapsed time is 00:00:01
Info (170189): Fitter placement preparation operations beginning
Info (170190): Fitter placement preparation operations ending: elapsed time is 00:00:00
Info (11888): Total time spent on timing analysis during the Fitter is 0.00 seconds.
Info (170216): Fitter cannot place all nodes on current device -- Fitter will automatically make another fitting attempt and tightly pack logic elements
Info (176234): Starting register packing
Info (186391): Fitter is using Minimize Area packing mode for logic elements with Auto setting for Auto Packed Registers logic option
Info (186468): Started processing fast register assignments
Info (186469): Finished processing fast register assignments
Info (176235): Finished register packing
Info (171121): Fitter preparation operations ending: elapsed time is 00:00:00
Info (170189): Fitter placement preparation operations beginning
Info (170190): Fitter placement preparation operations ending: elapsed time is 00:00:00
Info (11888): Total time spent on timing analysis during the Fitter is 0.02 seconds.
Info (170216): Fitter cannot place all nodes on current device -- Fitter will automatically make another fitting attempt and tightly pack logic elements
Info (176234): Starting register packing
Info (186391): Fitter is using Minimize Area with Chains packing mode for logic elements with Auto setting for Auto Packed Registers logic option
Info (186468): Started processing fast register assignments
Info (186469): Finished processing fast register assignments
Info (176235): Finished register packing
Info (171121): Fitter preparation operations ending: elapsed time is 00:00:00
Info (170189): Fitter placement preparation operations beginning
Info (170190): Fitter placement preparation operations ending: elapsed time is 00:00:00
Info (170191): Fitter placement operations beginning
Info (170137): Fitter placement was successful
Info (170192): Fitter placement operations ending: elapsed time is 00:00:00
Info (170193): Fitter routing operations beginning
Info (170195): Router estimated average interconnect usage is 27% of the available device resources
	Info (170196): Router estimated peak interconnect usage is 27% of the available device resources in the region that extends from location X0_Y0 to location X13_Y8
	Info (170196): Router estimated peak interconnect usage is 27% of the available device resources in the region that extends from location X0_Y0 to location X13_Y8
Info (170194): Fitter routing operations ending: elapsed time is 00:00:01
Info (170199): The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time.
	Info (170201): Optimizations that may affect the design's routability were skipped
	Info (170200): Optimizations that may affect the design's timing were skipped
	Info (170201): Optimizations that may affect the design's routability were skipped
	Info (170200): Optimizations that may affect the design's timing were skipped
Info (11888): Total time spent on timing analysis during the Fitter is 0.08 seconds.
Info (11218): Fitter post-fit operations ending: elapsed time is 00:00:00
Warning (169174): The Reserve All Unused Pins setting has not been specified, and will default to 'As output driving ground'.
Info (144001): Generated suppressed messages file //MARIO/scambio/mcpx5Max2 pre/output_files/mcpx5max2.fit.smsg
Info: Quartus II 64-Bit Fitter was successful. 0 errors, 16 warnings
	Info: Peak virtual memory: 609 megabytes
	Info: Processing ended: Thu Dec 17 08:09:21 2015
	Info: Elapsed time: 00:00:06
	Info: Total CPU time (on all processors): 00:00:03
	Info: Peak virtual memory: 609 megabytes
	Info: Processing ended: Thu Dec 17 08:09:21 2015
	Info: Elapsed time: 00:00:06
	Info: Total CPU time (on all processors): 00:00:03
Info: *******************************************************************
Info: Running Quartus II 64-Bit Assembler
	Info: Version 13.0.1 Build 232 06/12/2013 Service Pack 1 SJ Web Edition
	Info: Processing started: Thu Dec 17 08:09:23 2015
	Info: Version 13.0.1 Build 232 06/12/2013 Service Pack 1 SJ Web Edition
	Info: Processing started: Thu Dec 17 08:09:23 2015
Info: Command: quartus_asm --read_settings_files=off --write_settings_files=off mcpx5max2 -c mcpx5max2
Info (115031): Writing out detailed assembly data for power analysis
Info (115030): Assembler is generating device programming files
Info: Quartus II 64-Bit Assembler was successful. 0 errors, 0 warnings
	Info: Peak virtual memory: 392 megabytes
	Info: Processing ended: Thu Dec 17 08:09:25 2015
	Info: Elapsed time: 00:00:02
	Info: Total CPU time (on all processors): 00:00:01
	Info: Peak virtual memory: 392 megabytes
	Info: Processing ended: Thu Dec 17 08:09:25 2015
	Info: Elapsed time: 00:00:02
	Info: Total CPU time (on all processors): 00:00:01
Info (293026): Skipped module PowerPlay Power Analyzer due to the assignment FLOW_ENABLE_POWER_ANALYZER
Info: *******************************************************************
Info: Running Quartus II 64-Bit TimeQuest Timing Analyzer
	Info: Version 13.0.1 Build 232 06/12/2013 Service Pack 1 SJ Web Edition
	Info: Processing started: Thu Dec 17 08:09:26 2015
	Info: Version 13.0.1 Build 232 06/12/2013 Service Pack 1 SJ Web Edition
	Info: Processing started: Thu Dec 17 08:09:26 2015
Info: Command: quartus_sta mcpx5max2 -c mcpx5max2
Info: qsta_default_script.tcl version: #1
Warning (20028): Parallel compilation is not licensed and has been disabled
Info (21077): Low junction temperature is 0 degrees C
Info (21077): High junction temperature is 85 degrees C
Info (306004): Started post-fitting delay annotation
Info (306005): Delay annotation completed successfully
Info (332104): Reading SDC File: '//MARIO/scambio/mcpx5Max2 pre/SDC3.sdc'
Warning (332153): Family doesn't support jitter analysis.
Warning (332125): Found combinational loop of 2 nodes
	Warning (332126): Node "inst142~1|combout"
	Warning (332126): Node "inst142~1|datab"
	Warning (332126): Node "inst142~1|combout"
	Warning (332126): Node "inst142~1|datab"
Warning (332060): Node: A0 was determined to be a clock but was found without an associated clock assignment.
Warning (332060): Node: NCSE was determined to be a clock but was found without an associated clock assignment.
Warning (332060): Node: 74175:inst15|14 was determined to be a clock but was found without an associated clock assignment.
Warning (332060): Node: 74175:inst15|16 was determined to be a clock but was found without an associated clock assignment.
Warning (332060): Node: 74175:inst15|15 was determined to be a clock but was found without an associated clock assignment.
Warning (332060): Node: inst138 was determined to be a clock but was found without an associated clock assignment.
Warning (332060): Node: inst201 was determined to be a clock but was found without an associated clock assignment.
Warning (332060): Node: inst148 was determined to be a clock but was found without an associated clock assignment.
Warning (332060): Node: inst189 was determined to be a clock but was found without an associated clock assignment.
Info: Found TIMEQUEST_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON
Info (332146): Worst-case setup slack is 36.775
	Info (332119):     Slack End Point TNS Clock 
	Info (332119): ========= ============= =====================
	Info (332119):    36.775         0.000 CLK 
	Info (332119):     Slack End Point TNS Clock 
	Info (332119): ========= ============= =====================
	Info (332119):    36.775         0.000 CLK 
Info (332146): Worst-case hold slack is 1.403
	Info (332119):     Slack End Point TNS Clock 
	Info (332119): ========= ============= =====================
	Info (332119):     1.403         0.000 CLK 
	Info (332119):     Slack End Point TNS Clock 
	Info (332119): ========= ============= =====================
	Info (332119):     1.403         0.000 CLK 
Info (332140): No Recovery paths to report
Info (332140): No Removal paths to report
Info (332146): Worst-case minimum pulse width slack is 20.567
	Info (332119):     Slack End Point TNS Clock 
	Info (332119): ========= ============= =====================
	Info (332119):    20.567         0.000 CLK 
	Info (332119):     Slack End Point TNS Clock 
	Info (332119): ========= ============= =====================
	Info (332119):    20.567         0.000 CLK 
Info (332001): The selected device family is not supported by the report_metastability command.
Info (332102): Design is not fully constrained for setup requirements
Info (332102): Design is not fully constrained for hold requirements
Info: Quartus II 64-Bit TimeQuest Timing Analyzer was successful. 0 errors, 14 warnings
	Info: Peak virtual memory: 382 megabytes
	Info: Processing ended: Thu Dec 17 08:09:30 2015
	Info: Elapsed time: 00:00:04
	Info: Total CPU time (on all processors): 00:00:02
	Info: Peak virtual memory: 382 megabytes
	Info: Processing ended: Thu Dec 17 08:09:30 2015
	Info: Elapsed time: 00:00:04
	Info: Total CPU time (on all processors): 00:00:02
Info (293000): Quartus II Full Compilation was successful. 0 errors, 56 warnings
