Stopping running target Altera - Cyclone V SoC (Dual Core) on TCP:localhost on connection
Connected to running target Altera - Cyclone V SoC (Dual Core) on TCP:localhost
Execution stopped at: S:0x00002FA8
source /v "D:\altera\14.0\embedded\ds-5\sw\debugger\configdb\Scripts\altera_target_check.py"
S:0x00002FA8   TST      r1,#4

No SYSID registers could be found. Has a peripheral description file been supplied?

source /v "D:\my_experiment\hwlib\Micrium\Software\EvalBoards\Altera\Cyclone-V-Dev-Kit\GNU\Ex-1\debug-hosted.ds"
+reset system
+wait 30s
+stop
WARNING(CMD315): Target is not running
+wait 30s
+set semihosting enabled false
+loadfile "$sdir/u-boot-spl.axf" 0x0
Loaded section .text: S:0xFFFF0000 ~ S:0xFFFF65A7 (size 0x65A8)
Loaded section .rodata: S:0xFFFF65A8 ~ S:0xFFFF80E7 (size 0x1B40)
Loaded section .data: S:0xFFFF80E8 ~ S:0xFFFF8FAF (size 0xEC8)
Loaded section .bss: S:0xFFFF8FB0 ~ S:0xFFFF905F (size 0xB0)
Loaded section .malloc: S:0xFFFF9060 ~ S:0xFFFFA45F (size 0x1400)
Loaded section .stack: S:0xFFFFA460 ~ S:0xFFFFB45F (size 0x1000)
Loaded section .spl_irq_stack: S:0xFFFFB460 ~ S:0xFFFFB867 (size 0x408)
Entry point S:0xFFFF0000
Target has been reset
Execution stopped due to a breakpoint or watchpoint: S:0x00000000
S:0x00000000   LDR      pc,[pc,#24] ; [0x20] = 0xA8
+set semihosting enabled true
Semihosting server socket created at port 8000
+delete
All user breakpoints deleted
+tbreak spl_boot_device
Breakpoint 1 at S:0xFFFF1064
    on file spl.c, line 70
    on file spl.c, line 80
+run
Reloading program
Starting target with image D:\my_experiment\hwlib\Micrium\Software\EvalBoards\Altera\Cyclone-V-Dev-Kit\GNU\Ex-1\u-boot-spl.axf
Running from entry point
+wait
Execution stopped at breakpoint 1: S:0xFFFF1064
In spl.c
S:0xFFFF1064   70,0   {
Deleted temporary breakpoint: 1
+loadfile "$sdir/ucosii.axf" 0x0
Loaded section .text: S:0x00100000 ~ S:0x0010E297 (size 0xE298)
Loaded section .rodata: S:0x0010E298 ~ S:0x0010E717 (size 0x480)
Loaded section .data: S:0x0010E718 ~ S:0x0010EFE7 (size 0x8D0)
Loaded section .bss: S:0x0010EFE8 ~ S:0x00110D0F (size 0x1D28)
Loaded section .eh_frame: S:0x00110D10 ~ S:0x00110D13 (size 0x4)
Entry point S:0x0010B298
+start
Starting target with image D:\my_experiment\hwlib\Micrium\Software\EvalBoards\Altera\Cyclone-V-Dev-Kit\GNU\Ex-1\ucosii.axf
Running from entry point
loadfile "D:\my_experiment\hwlib\Micrium\Software\EvalBoards\Altera\Cyclone-V-Dev-Kit\GNU\Ex-1\ucosii.axf"
ERROR(CMD16-TAD11-NAL33): 
! Failed to load "ucosii.axf"
! Failed to write 12 bytes to address N:0x00110D10
! Target is running, cannot access.
cd "D:\my_experiment\hwlib"
Working directory "D:\my_experiment\hwlib"
set debug-from main
start
ERROR(CMD350): Command not possible when running
wait