Forum Discussion

aakkü's avatar
aakkü
Icon for Occasional Contributor rankOccasional Contributor
7 years ago

Another sld_hub error

Hello,

I am trying to use NIOS 2 processor in max10 FPGA thus I've been unsuccesful. My project includes a NIOS 2 processor with parallel I/O controlling some LEDS.

This is the error I get when I try to compile the project:

Error (11176): Set_instance_parameter_value: There is no parameter named DESIGN_HASH on instance alt_sld_fab

Error (11176): Alt_sld_fab.: version not allowed for EModuleProperty, must be in {[DESCRIPTION, NAME, VERSION, MODULE_TCL_FILE, MODULE_DIRECTORY, INTERNAL, HIDE_FROM_SOPC, HIDE_FROM_QSYS, HIDE_FROM_QUARTUS, OPAQUE_ADDRESS_MAP, GROUP, AUTHOR, ICON_PATH, DISPLAY_NAME, DATASHEET_URL, TOP_LEVEL_HDL_FILE, TOP_LEVEL_HDL_MODULE, INSTANTIATE_IN_SYSTEM_MODULE, EDITABLE, VALIDATION_CALLBACK, EDITOR_CALLBACK, ELABORATION_CALLBACK, GENERATION_CALLBACK, COMPOSITION_CALLBACK, PARAMETER_UPGRADE_CALLBACK, OUTDATED_IP_FILE, ANALYZE_HDL, STATIC_TOP_LEVEL_MODULE_NAME, FIX_110_VIP_PATH, SUPPORTED_DEVICE_FAMILIES, REPORT_TO_TALKBACK, ALLOW_GREYBOX_GENERATION, SUPPRESS_WARNINGS, STRUCTURAL_COMPOSITION_CALLBACK, NATIVE_INTERPRETER, PREFERRED_SIMULATION_LANGUAGE, REPORT_HIERARCHY, UPGRADEABLE_FROM]}

Error (12154): Can't elaborate inferred hierarchy "sld_hub:auto_hub"

Error: Quartus Prime Analysis & Synthesis was unsuccessful. 3 errors, 4 warnings

Error: Peak virtual memory: 4931 megabytes

Error: Processing ended: Tue Jan 29 14:19:40 2019

Error: Elapsed time: 00:00:33

Error: Total CPU time (on all processors): 00:00:49

Error: Peak virtual memory: 4931 megabytes

Error: Processing ended: Tue Jan 29 14:19:40 2019

Error: Elapsed time: 00:00:33

Error: Total CPU time (on all processors): 00:00:49

Error (293001): Quartus Prime Full Compilation was unsuccessful. 5 errors, 4 warnings

I googled this problem and found out similar forum threads, but nothing fixed my problem.

What should I do?

36 Replies

  • Ahmed_H_Intel1's avatar
    Ahmed_H_Intel1
    Icon for Frequent Contributor rankFrequent Contributor
    7 years ago
    Hi, Can you share with me the QSYS system (Screen Shot) and the top level Quartus project file (screen shot)? It seems you are doing something wrong. BTW it is recommended to start with a Golden top design or a reference design in case of using one of Intel's Dev-Kits.
  • aakkü's avatar
    aakkü
    Icon for Occasional Contributor rankOccasional Contributor
    7 years ago

    Hi,

    Thanks for your reply.

    I used this development board without any golden top file in the past and they all worked fine. I don't know it's the source of my problem. Can you confirm that it's not a licensing problem? I am using the free version.

    Here are the files you requested. Should I share the .par file as well?

  • aakkü's avatar
    aakkü
    Icon for Occasional Contributor rankOccasional Contributor
    7 years ago

    Qsys screen capture is attached. I couldn't manage to add two files at once.

  • Ahmed_H_Intel1's avatar
    Ahmed_H_Intel1
    Icon for Frequent Contributor rankFrequent Contributor
    7 years ago
    Hi, Thanks for the sharing. It is a very simple design, I can't see a fetal error. Please start with one of our example designs here which will be pre-compiled successfully, you need only to edit it as per your preferences and recompile. https://fpgacloud.intel.com/devstore/platform/?acds_version=16.0&ip_core=NiosII&family=max-10&category=2 For more info please check this: Online training: Basics of Programmable Logic (http://wl.altera.com/education/training/courses/ODSW1005) The Quartus Software Design Series Foundation(http://wl.altera.com/education/training/courses/ODSW1110) The Quartus Software Interactive Tutorial (http://wl.altera.com/education/training/courses/ODSW1050) Regards, Ahmed
  • Ahmed_H_Intel1's avatar
    Ahmed_H_Intel1
    Icon for Frequent Contributor rankFrequent Contributor
    7 years ago
    Hi, I didn't see any errors when I've created the project, It should be a license issue, Can you use the NIOS e core instead and try?
    • aakkü's avatar
      aakkü
      Icon for Occasional Contributor rankOccasional Contributor
      7 years ago

      Hello,

      Is there any progress on solving this issue?

    • aakkü's avatar
      aakkü
      Icon for Occasional Contributor rankOccasional Contributor
      7 years ago

      unfortunately I also tried that before. There is no change.

      What do I try next?

    • aakkü's avatar
      aakkü
      Icon for Occasional Contributor rankOccasional Contributor
      7 years ago

      Hello Embedded_guy,

      Is there any progress? I've been trying different examples for different FPGA series and I get the same errors.

  • Ahmed_H_Intel1's avatar
    Ahmed_H_Intel1
    Icon for Frequent Contributor rankFrequent Contributor
    7 years ago
    Even a simplified qpf will be fine, don't reveal your design if you mind.
    • aakkü's avatar
      aakkü
      Icon for Occasional Contributor rankOccasional Contributor
      7 years ago

      I'm not worried about revaling my design. I'm simply trying to get the processor working.

      I'm trying to compile the project the same project you shared (max10_LED) Why do you even want the files? I am getting the same errors which I shared below. I am gonna share entire design files, the only change that I made is changing NIOS/f to NIOS/e, apart from that there is no change.

      Error (11176): Set_instance_parameter_value: There is no parameter named DESIGN_HASH on instance alt_sld_fab

      Error (11176): Alt_sld_fab.: version not allowed for EModuleProperty, must be in {[DESCRIPTION, NAME, VERSION, MODULE_TCL_FILE, MODULE_DIRECTORY, INTERNAL, HIDE_FROM_SOPC, HIDE_FROM_QSYS, HIDE_FROM_QUARTUS, OPAQUE_ADDRESS_MAP, GROUP, AUTHOR, ICON_PATH, DISPLAY_NAME, DATASHEET_URL, TOP_LEVEL_HDL_FILE, TOP_LEVEL_HDL_MODULE, INSTANTIATE_IN_SYSTEM_MODULE, EDITABLE, VALIDATION_CALLBACK, EDITOR_CALLBACK, ELABORATION_CALLBACK, GENERATION_CALLBACK, COMPOSITION_CALLBACK, PARAMETER_UPGRADE_CALLBACK, OUTDATED_IP_FILE, ANALYZE_HDL, STATIC_TOP_LEVEL_MODULE_NAME, FIX_110_VIP_PATH, SUPPORTED_DEVICE_FAMILIES, REPORT_TO_TALKBACK, ALLOW_GREYBOX_GENERATION, SUPPRESS_WARNINGS, STRUCTURAL_COMPOSITION_CALLBACK, NATIVE_INTERPRETER, PREFERRED_SIMULATION_LANGUAGE, REPORT_HIERARCHY, UPGRADEABLE_FROM]}

      Error (12154): Can't elaborate inferred hierarchy "sld_hub:auto_hub"

      Error: Quartus Prime Analysis & Synthesis was unsuccessful. 3 errors, 30 warnings

      Error: Peak virtual memory: 5095 megabytes

      Error: Processing ended: Fri Feb 15 10:04:45 2019

      Error: Elapsed time: 00:00:36

      Error: Total CPU time (on all processors): 00:01:10

      Error: Peak virtual memory: 5095 megabytes

      Error: Processing ended: Fri Feb 15 10:04:45 2019

      Error: Elapsed time: 00:00:36

      Error: Total CPU time (on all processors): 00:01:10

      Error (293001): Quartus Prime Full Compilation was unsuccessful. 5 errors, 30 warnings

      Can you please focus on the errors I get, I know you don't get any errors.

  • Ahmed_H_Intel1's avatar
    Ahmed_H_Intel1
    Icon for Frequent Contributor rankFrequent Contributor
    7 years ago
    Hi, I've compiled the same project you sent to me and I cannot see any issue, Can you please check your Quartus installation?
  • Ahmed_H_Intel1's avatar
    Ahmed_H_Intel1
    Icon for Frequent Contributor rankFrequent Contributor
    7 years ago
    Hi, I've compiled the same project you sent to me and I cannot see any issue, Can you please check your Quartus installation?
    • aakkü's avatar
      aakkü
      Icon for Occasional Contributor rankOccasional Contributor
      7 years ago

      Are you serious? You've been telling me the same thing for a month, that you don't see any errors look at my screenshot. I do get errors that's why I'm here to ask for help.

      I tried reinstalling, running different versions and even running it in different computers as I told you before, yet you are just telling me you can run it in your computer. I get that, can you please stop repeating that.

      Can you please please please focus on the errros that I get andsuggest me something useful other you telling me that you don't get errors or reinstall.

      The error seems to revolve around "alt_sld_fab".

      I am patiently, very patiently waiting for your response.

      Thanks!