Forum Discussion

Tirupataiah's avatar
Tirupataiah
Icon for New Contributor rankNew Contributor
3 years ago

SD card Prebuilt binaries for Stratix-10 EVK

Hi,

I am having the Stratix-10 Soc H-Tile with part number 1SX280HU2F50E1VGAS. How can I get the pre-built binaries for SD card booting?

Which procedure i can follow to flash images into an SD card?

Please help me regarding this issue.

Thanks in advance.

Fpga Devkit

27 Replies

Show More
    • Tirupataiah's avatar
      Tirupataiah
      Icon for New Contributor rankNew Contributor
      3 years ago

      Hi Mabdrani,

      I did not receive any sd card image to my mail from you.

      Please send it again to me.

      I have using 23.2 only to generate the rbf but still i am getting errors.

      I will share the error log very soon.

  • mabdrahi's avatar
    mabdrahi
    Icon for Contributor rankContributor
    3 years ago

    Hi Tiru,


    I hope you doing well,


    May i know about the update from your side?


    • Tirupataiah's avatar
      Tirupataiah
      Icon for New Contributor rankNew Contributor
      3 years ago

      Hi,

      I did not receive your sd image. Please send it again.

      I am using 23.2 nios shell to build the hardware design but still i am getting the below error.

      2023.08.18.15:44:50 Info: Synchronizing System Information for mge_led_pio
      2023.08.18.15:44:50 Info: Synchronizing System Information for mge_rcfg_pio
      2023.08.18.15:44:50 Info: Synchronizing System Information for frz_ctrl_0
      2023.08.18.15:44:50 Info: Synchronizing System Information for frz_bdg_0
      2023.08.18.15:44:50 Info: Synchronizing System Information for s10_hps
      2023.08.18.15:44:52 Info: Synchronizing System Information for emif_hps
      2023.08.18.15:44:52 Info: Synchronizing System Information for f2sdram_m_0
      2023.08.18.15:44:52 Info: Synchronizing System Information for f2sdram_m_1
      2023.08.18.15:44:52 Info: Synchronizing System Information for f2sdram_m_2
      2023.08.18.15:44:52 Info: Synchronizing System Information for fpga_m
      2023.08.18.15:44:52 Info: Synchronizing System Information for hps_m
      2023.08.18.15:44:52 Info: Synchronizing System Information for jtag_clk
      2023.08.18.15:44:52 Info: Synchronizing System Information for jtag_rst_in
      make[1]: *** [Makefile:675: qsys_generate_qsys] Error 1
      make[1]: Leaving directory '/home/tirupataiah/Tiru/stratix10_gsrd/s10_soc_devkit_ghrd'
      make: *** [Makefile:695: generate_from_tcl] Error 2
      tirupataiah@LAP841U:~/Tiru/stratix10_gsrd/s10_soc_devkit_ghrd$

  • mabdrahi's avatar
    mabdrahi
    Icon for Contributor rankContributor
    3 years ago

    p/s: If any answer from the community or Intel Support are helpful, please feel free to give best answer or rate 4/5 survey.


  • mabdrahi's avatar
    mabdrahi
    Icon for Contributor rankContributor
    3 years ago

    Hi Tiru,


    I sending again using email.

    please acknowledge me the status

    Stay tune


  • mabdrahi's avatar
    mabdrahi
    Icon for Contributor rankContributor
    3 years ago

    Hi Tiru,


    I would like to have call


    What is your GMT and suitable time?


  • Tirupataiah's avatar
    Tirupataiah
    Icon for New Contributor rankNew Contributor
    3 years ago

    Hi Mabdrahi,

    Once i have received the SD card image from you, i will give you the conformation.

    My GMT is GMT +5:30 hours. Based on that you can schedule the meeting i can join in that.

    Thank you.

  • mabdrahi's avatar
    mabdrahi
    Icon for Contributor rankContributor
    3 years ago

    Hi Tiru,


    as per yesterday's discussion, you will provide the link for your shared cloud, may I know the update?



  • mabdrahi's avatar
    mabdrahi
    Icon for Contributor rankContributor
    3 years ago

    Hi tiru,


    I already put the sdcard image into the storage cloud


    • HCha's avatar
      HCha
      Icon for New Contributor rankNew Contributor
      3 years ago

      Hi,

      I'm also trying to build the H-tile EVK example design from Rocketboards but having all different kinds of issues. Was this ticket resolved eventually? May I also get the pre-built binaries sdcard image for 1SX280HU2F50E1VGAS?

      thanks,